Search our shop

After powering on, the system defaults to Still Water mode, and the still water indicator illuminates.
Press and hold the "Sparkling On/Off" button for 3 seconds to activate the sparkling water function. Then select your desired bubble level:
Level 1 Button – Light bubbles
Level 2 Button – Classic bubbles
Level 3 Button – Bold bubbles
Once a mode is selected, the sparkling water production cycle begins and takes approximately 1 minute to complete. Each cycle produces 600 ml of sparkling water.
Please note: The bubble level cannot be changed until the current cycle is finished. "Always Fresh" Button
With the Always Fresh function activated, the refrigerator automatically carbonates the water every 4 hours during the user-specified time frame. This ensures the sparkling water stays fresh, preserves its optimal flavor, and minimizes the risk of bitterness or loss of carbonation over time.
The user can configure the start and end times via the app, enabling the system to operate automatically during the selected time frame and deliver consistently high-quality sparkling water without requiring manual intervention.
"3s Reset" Button
When the CO₂ cylinder is running low, the indicator light flashes. After replacing the CO₂ cylinder, press and hold this button for 3 seconds until the indicator turns off, indicating that the reset is successful.

The ice maker and ice storage compartment are located in the upper section of the freezer. When usingthe ice maker, ensure the ice maker switch is turned on and the water system is properly connected.
The ice making function is OFF by default upon power-up. Touch "Cube Ice" or "Crunch Ice" button to activate the ice maker. The indicator will light up and ice production will begin. Touch button again to disable the function.
Ice production operates continuously in cycles. Once the ice storage bin is full, the ice-making process will automatically stop.

Press the FRESH FLEX button to adjust the temperature of the FreshFlex Multi-Mode Zone.
Power-on default "Fruit & Vegetable" mode, single tap to switch modes:
· Soft Freeze Mode: The flex temperature drawerwill operate at -3~-1°C
· Beverage Mode: The flex temperature drawerwill operate at -1~1°C
· Fruit & Vegetable Mode: The flex temperaturedrawer will operate at 2~4°C

(1) Network Configuration Settings
Unlock the control panel: Press and hold the "3s Unlock" button for more than 3 seconds until you hear a beep.
Enter Wi-Fi mode: Press and hold the "3s Wi-Fi" button for more than 3 seconds until you hear a beep and the Wi-Fi icon starts flashing.
(2) Device Binding
Connect your phone to a 2.4GHz Wi-Fi network.
Open the DREAME app and follow the on-screen prompts to add and bind your device.
Once successfully bound, the refrigerator will appear in the app's device list, and you can control it remotely.

Exterior Cleaning: Gently wipe the door and handles with a soft damp cloth and neutral detergent, then dry with a clean cloth.
Interior Cleaning: We recommend periodic cleaning with the power off. Remove all food items and wipe the interior walls, shelves, and drawers with a soft cloth. The refrigerator features an antibacterial interior and an easy-to-clean design for effortless maintenance.