402.5 (D) × 180 (W) × 315 (H) mm
Product net weight: 8.0 kg
Main unit, water tank, external drip tray, milk container assembly, milk container base, power cord, cleaning brush, cleaning needle, and descaling agent (3 packets)
1,420-1,690 W
220-240 V 50-60 Hz
150 g coffee beans
1.5 L
240 mL
9 levels
Espresso, Lungo, Flat White, Cappuccino, Latte Macchiato, Hot Milk Foam, Hot Water
Auto Rinse at startup and shutdown, Deep Clean program (a 1-minute cycle to clean coffee nozzle and milk frother nozzle), and automatic descaling program.
With an ultra-narrow 18 cm width and 31.5 cm height, it easily fits in any kitchen, studio, or similar place.
The grind setting is adjustable with 9 levels. It is recommended to adjust the grind setting dial during the grinding process.
The milk container and all connected tubes are removable for cleaning. Refer to the cleaning guide and official product videos for detailed steps.
This machine can generate 19 bar of pump pressure.
8-12 g
Precise grind settings, accurate bean dosing, an automatic tamping system, and stable 19‑bar high‑pressure extraction work together to deliver a rich, silky and creamy espresso.
For first-time use, simply fill the bean hopper with coffee beans and add water to the water tank. You can then start using the Espresso and Lungo functions. A cleaning reminder will pop up after every 10 cups of coffee brewed.
Yes. The machine can automatically froth milk, allowing one‑touch preparation of Flat White, Cappuccino, Latte Macchiato, and hot milk foam.
The machine pre‑heats automatically on startup, with preheating completed in about 1 minute.
Yes, the product features a Pre‑infusion function for more thorough coffee extraction. This function can be disabled in the mode selection menu.
No. Only whole coffee beans should be placed in the bean hopper. Do not put any other objects or liquids inside.
The choice of coffee beans depends on your preference for coffee strength and sweetness. The Arabica beanstend to have a sweeter taste, while the Robusta beansoffer a stronger, more bitter flavour. It is not recommended to use overly oily coffee beans.
For first‑time use, it is recommended to try the Espresso function. While grinding, turn the adjustment dial. If the coffee flows too slowly and tastes bitter, adjust to a coarser setting. If the coffee flows too quickly and tastes weak, adjust to a finer setting.
Yes. During coffee or milk froth delivery, tap and hold the current function button to enter custom adjustment mode. Release the button when the desired amount is reached. The machine will memorize this setting. Next time, simply tap the function button directly to use the saved amount.
In standby mode, tap and hold the Power button and the Latte Macchiato button simultaneously for 5 seconds to restore factory settings.
To prolong the machine's service life, it is recommended to use filtered water.
For first-time use, it is recommended to brew 3–4 cups of espresso before normal consumption to ensure optimal coffee quality.
The machine is set to remind you to clean the used coffee container after every 10 cups of coffee brewed.
Run the hot water flush three times before brewing to preheat the machine.
This may be caused by excessive scale buildup. Please run the descaling cycle.
Moisture may be present near the water tank connector. Please wipe the connector area dry thoroughly.
This may be caused by coffee grounds that are too fine, blocking the water outlet. Please adjust the grinder to a coarser setting.
When the bean hopper is empty, the bean shortage reminder icon on the panel will light up and flash, and all functions will be paused.
1. Ensure the power cord is properly connected to both the device and the electrical outlet.2. Tap the Power On/Off button to turn the device on.
1. Disconnect the power cord, wait a few minutes, then plug it back in and restart the machine.2. Clean the panel surface with the provided cloth.
The emptying system function may have been used previously. Tap the Hot Milk/Hot Water button until water flows from the nozzle.
1. Tap the lower section of the button icon from the front.2. Clean the panel surface with the provided cloth.
1. After each use of the milk container and its connected components, clean them within 30 minutes. 2. Clean the used coffee container and drip tray daily. 3. Rinse the brewing unit once a month.
The hole of the milk tube connector is blocked by milk residue. Use the cleaning needle to clean it.
This may indicate a blockage in the coffee powder outlet.Please refer to the section "Cleaning the Brewing Unit and Coffee Powder Outlet" for detailed instructions.
The machine will remind you to descale after approximately 20 L of water has been used.
You need to complete a full descaling program to clear the descale indicator light.
A full descaling cycle takes about 1 hour.
We use cookies on our website to give you the best shopping experience. By using this site, you agree to its use of cookies.
UAE
